How to use iodine for tomato seedlings?

How to use iodine for tomato seedlings?

Everyone dreams of having tasty and healthy vegetables on their table. But unfortunately, not all self-grown fruits will meet these requirements. As for tomatoes, familiar means will help to achieve the desired result, among which iodine, which is sold in any pharmacy, should be highlighted.

Beneficial features

A decent crop of tomatoes directly depends on proper plant care. Most experienced gardeners recommend using iodine as a top dressing to ensure the health of crops. The use of this medical product in the correct proportions will only benefit the plants. Iodine is used both for seedlings of tomatoes and for planted tomatoes in a greenhouse or in open ground. In any of the above options, it provides nourishment to plants, contributing to their proper development and strengthening.

Everyone knows that the most delicious tomato is the one that is grown with your own hands. The main advantage of self-care is the control of the entire process of growth and maturation of the culture. In addition, the issue of fertilizer can be approached with all responsibility.

It has been proven that iodine has a beneficial effect on plant organisms, but is not a vital element. In small doses, it has a stimulating effect on tomatoes, but its excess for crops will be poisonous. Therefore, it is worth using the remedy in reasonable quantities.

As for humans, eating tomatoes for which iodine has been used as a fertilizer is very beneficial for health, since the fruits of the plants will contain the amount of trace elements required for humans.

Using the composition for plants, the latter have a positive trend associated with nitrogen metabolism, since iodine acts as a worthy alternative to nitrogen fertilizers.

In addition to the above beneficial properties of iodine, which relate to the growth and development of plants, it should be noted that this pharmaceutical preparation allows you to successfully deal with various types of fungi and other harmful microorganisms that multiply not only on the plant itself, but also in the soil.

Lack of iodine in tomatoes can be determined by their too slow development, in addition, the culture shows various signs that indicate its illness.

To prevent an excess of iodine, you should know in which soil it is most present. The following types of soil can be distinguished:

  • chernozem and red soil;
  • chestnut soil;
  • tundra peatlands.

In addition, iodine is present in natural fertilizers, which are often used to grow vegetables and fruits in their own gardens and summer cottages. These include the following compositions:

  • peat and peat ash;
  • manure;
  • wood ash.

The correct use of iodine at home will allow you to nourish the tomatoes from the very beginning of their growth until the ovaries appear.

What is it needed for?

Iodine as an element in the development of tomatoes is a catalyst, due to which the ability of the plant to absorb nutrients improves.In addition, it has a positive effect on the protective properties of the culture, which excludes the development of various pathologies.

There are several methods for feeding a plant: feeding the root system from the soil and spraying the leaves and stem.

It is necessary to highlight the main advantages of fertilizing tomatoes with iodine:

  • the tool helps to strengthen the immune system, and is also a preventive composition that protects against various diseases of a vegetable crop, since it has been proven that such tomatoes rarely get sick with viruses;
  • protects fruits from fungi;
  • acts as a substitute for some fertilizers, such as saltpeter;
  • iodine ennobles the soil, increasing its fertility;
  • if you fertilize tomatoes with iodine, the plant will better absorb other useful elements from the air and soil;
  • starting to water seedlings of tomatoes with a solution of iodine, you can achieve earlier flowering and fruit ripening;
  • the tool improves the quality of tomatoes in general;
  • processing seedlings with a composition prevents it from stretching, leaf lethargy occurs less often;
  • iodine is an effective means of combating late blight.

    Comparing such a vegetable crop as a tomato with other plants, it is worth noting that it is in dire need of top dressing, so even healthy plants require processing.

    The lack of iodine in tomatoes can be determined by a number of signs:

    • seedlings look wilted;
    • the stems of the plant are very thin;
    • tendency to various putrefactive diseases of the root system.

    However, it will not be enough to have an idea about the benefits of the element for the plant, since the correct preparation of tomato feed containing iodine is extremely important, because its excess will lead to negative consequences.

    Experts use two methods to saturate the plant with this composition: root and foliar top dressing. To achieve the most positive result, the above methods should be used alternately. Thus, if necessary, it is possible to achieve a therapeutic result or use fertilizer for preventive measures, which have a rather prolonged effect.

    Recipes

    There are several popular and effective ways to prepare a composition that includes iodine. An element properly diluted in water will not be poisonous either to the soil or to plants, since its concentration in the total volume of the solution will be minimal. This completely eliminates the risk of burning the foliage or root of the tomato.

    To heal the seeds, an iodine-containing composition is prepared according to the following method: one drop of iodine is dissolved in one liter of water. The material is pre-soaked in it before planting for six to seven hours. In this case, the element acts as an antiseptic: it disinfects the culture, and also activates its growth.

    However, it is worth paying attention to the fact that planting material covered with a multi-colored shell does not need to be soaked before planting.

    To feed the plants after the first feeding with mineral fertilizers, a solution is prepared for irrigation using one of the methods described below.

    In the first case, the composition is prepared not only with water, but also with milk. For cooking, you need half a liter of milk, two liters of ordinary water and two drops of iodine.

    In the second option, for fertilizer, you need to dissolve one drop of iodine in three liters of water.

    The technology for watering tomatoes with such means is to work with a watering can with a strainer.It is only necessary to slightly moisten the soil and foliage of tomatoes.

    It is worth noting that such processing is needed only once.

    As for watering the soil before planting seedlings, for these purposes a solution with a useful element is prepared as follows: three drops of iodine are diluted in ten liters of water, after which the soil is well watered. This work should be done about a day before planting crops. The need for such watering of the soil is due to the ability of the element to disinfect the soil for plants that are not yet strong, which will positively affect their adaptation.

    Processing of tomatoes from late blight is carried out with a composition that is prepared according to the following recipe:

    • a liter of whey is added to a bucket of water;
    • then 40 drops of alcohol tincture of iodine;
    • hydrogen peroxide acts as the last component, it must be added one tablespoon.

    With this composition, you need to process the seedlings of tomatoes.

    Some gardeners use a different composition to combat vegetable disease. According to experienced summer residents, it is more effective, and also provides stable immunity in plants.

    The solution for processing is prepared according to the following scheme:

    • two liters of ash powder are introduced into eight liters of boiled water and mixed well, allowed to cool;
    • after that, a bottle of iodine and ten grams of boric acid are added to the resulting composition;
    • the mixture should be infused for about twelve hours;
    • further, such a composition for treating plants is diluted with water in the proportion: one liter of the substance per bucket of water.

    Over time, the culture is watered under the root. Since the resulting solution contains a lot of useful substances, it can be used as the main fertilizer for tomatoes.However, during preparation, one should strictly follow the recommendations regarding the amount of the introduced element, since an excess of iodine can disrupt the natural course of the formation of culture brushes. As a result, the fruits will have a curved shape.

    How to feed?

    There are several ways to feed tomatoes with an iodine-containing compound.

    Root

    Such watering should be carried out after a few leaves appear on the culture. During this period, the additional introduction of useful trace elements will be very useful for tomatoes. In this case, you should use a solution of low concentration: it will be enough to dilute one drop of iodine in three liters of water. This amount of the element will be enough for a young plant. Root watering is carried out for each plant at the very root, so it will be possible to saturate the culture with a good portion of useful substances. In addition, the positive effect of the described irrigation method doubles, since together with iodine, the tomato receives the water it needs so much.

    After some time, when ovaries begin to form on the bushes, you can perform a second top dressing of tomatoes. In this case, the solution is prepared in slightly different proportions: it is recommended to introduce three drops of iodine for every ten liters of water. It is important that the water is at room temperature.

    The optimal amount for one plant bush is one liter of the composition. For low-growing varieties of tomatoes, 600-700 ml will be enough.

    The plant needs the next fertilizer at the stage when the culture begins to bear fruit. In this phase, it is worth using a solution with an even higher content of the element. Prepare the substance for irrigation according to the following recipe:

    • five liters of boiling water are mixed with three liters of ash powder and allowed to brew for about an hour in a closed container;
    • then five more liters of water, a vial of iodine and ten grams of boric acid are added to the composition;
    • thoroughly mixed ingredients are infused in a container for about a day;
    • the next day, the concentrate is diluted with water in a ratio of 1: 1 to water the tomatoes at the very root.

    Foliar

      Gardeners not only actively use the root method of plant nutrition, but also use the foliar method of strengthening vegetable crops. This technique is especially relevant for the control and prevention of late blight and other infections that affect plants, reducing their ability to resist bacteria and parasites, as well as disrupting natural growth and development.

      Foliar watering of tomatoes is carried out with a solution that is prepared in the following proportions: 200-250 ml of milk is mixed with five drops of iodine solution and a liter of warm water. Or they use a different recipe: fifteen drops of iodine, four liters of water and one liter of milk. After complete dissolution of all components, the plants are sprayed with a solution. It is best to do this work early in the morning or in the evening, after sunset. It is also worthwhile to first familiarize yourself with the weather forecast, since the positive effect of such treatment is possible only on a dry and calm day.

      In addition, it should be sprayed in moderation: an excess of iodine can harm the foliage and burn it.

      Helpful Hints

      Experienced growers to get the most out of using this micronutrient for tomato fertilization We recommend that you follow the recommendations below.

      • You should not use iodine-containing compositions for feeding if the seedlings were planted in the soil less than ten days ago.This is due to the fact that after the picking of crops, the plants experienced great stress and need rest, because they need to get used to a new place of growth.
      • For the prevention of various diseases, the iodine composition should be used once every three months.
      • Treatment with serum concentrate is carried out for a whole month with an interval of two or three days. If late blight is found on plants, it is necessary to increase the amount of the element content in the spraying solution.
      • In the event that crops are fed with iodine-containing compounds, the use of products containing aspirin should be abandoned.
      • If you plan to treat tomatoes with boric acid or peroxide, then after spraying with iodine, you need to maintain an interval of five to six days. Otherwise, the effect of iodine treatment will be minimal. As a result, tomatoes will not receive the necessary trace elements.
      • Using recipes for solutions where milk is one of the components, you need to know that only low-fat products need to be purchased for these purposes, since they dissolve better in mixtures containing iodine and are better combined with it.
      • Preventive measures for watering tomatoes, which eliminate the risk of plant disease with late blight, are carried out with solutions twice a month. Dairy formulations without iodine can be sprayed on crops more often.

      It is best to alternately treat the leaves with iodine-free serum and solutions based on it.

      For information on how to make top dressing for tomatoes from ash and iodine, see the following video.

      no comments
      The information is provided for reference purposes. Do not self-medicate. For health issues, always consult a specialist.

      Fruit

      Berries

      nuts