How to ferment currant leaves?
Currant leaves can be used to make fragrant, tasty and very nutritious tea. In order to be able to enjoy this drink in winter, many people dry the leaves, but in this case, tea does not give the same taste and smell. That is why the best harvesting option would be leaf fermentation.
Benefit
All homeowners know that currant leaves are very beneficial for the health of children and adults, they:
- improve the condition with kidney pathologies;
- normalize the functioning of the urinary system;
- promote healing from colds;
- improve the process of digestion of food;
- relieve insomnia;
- strengthen immunity;
- gently remove the manifestations of toxicosis.
Currant leaf tea is recommended for expectant mothers with diseases of the throat, bronchi and lungs when all other drugs are contraindicated.
Keep in mind that there are a number of contraindications to drinking currant leaf tea, for example, stomach and intestinal ulcers in the acute stage, gastritis, thrombophlebitis, and currant allergy.
Concept of fermentation
Fermentation is a process in which the insoluble tissues of the leaf blades are converted into soluble tissues so that they are easily absorbed by the body. Fermentation is an indispensable part of the tea tradition, thanks to which red, yellow and black teas can be obtained.If you simply brew collected and dried herbs, you get no more than 15% of the healing substances contained in them. Fermentation is a kind of self-digestion of the product, oxidation occurs here without oxygen access due to its own microorganisms and enzymes. As a result, all complex proteins and starches are converted into simplified water-soluble substances.
This is a complex and time-consuming process, during which the entire leaf structure must be destroyed to release the juice. This is the so-called fermentation of the material, on the correctness of which the final color, taste, smell of tea and the content of micronutrients in it depend. Bacteria are involved in the fermentation process, which are located in significant numbers on the surface of the plant, they start chemical reactions that look like this:
- leaf tissues are destroyed;
- juice secretion begins;
- under high temperature, fermentation and fermentation processes are launched;
- leaves and young shoots are fermented in their juice;
- the raw material becomes dark and acquires a rich berry smell.
It is the green parts of the plant that are fermented - the leaves and young shoots of green color, since it is in them that the concentration of tannins is high, which give the drink a tea flavor. The coarsened parts are not suitable - they have a minimal tannin content.
Procurement of raw materials
Everyone knows that the leaves on young green currant bushes remain green until the very cold. However, this does not mean at all that raw materials for fermentation can be prepared on any day and month.The most correct period for harvesting is the time of active flowering - it is during this period that the maximum number of vitamins and minerals accumulate in the green parts of the shrub. In central Russia, flowering begins in the last decade of May. In the southern regions, this period comes a little earlier, and in Siberia and the Urals - later.
In any case, as soon as flowers appear on the bushes, you should immediately collect the required number of leaves. It is advisable to do this work from 10 am to 12 pm, at this time there is still no scorching sun, but at the same time there are no remnants of morning dew. Harvesting of raw materials is best done in dry weather, as excess moisture interferes with proper fermentation and often leads to the formation of fungus and mold. Many experienced summer residents advise harvesting leaves for fermentation, focusing on the lunar calendar. A growing moon is considered a suitable period, and it is optimal to collect immediately after the new moon.
Only whole leaves without external damage and signs of diseases of the culture are suitable for collection, only apical shoots are collected. Leaves should not be washed, as this will wash away all the bacteria that are needed for fermentation with water.
If the leaves are too dirty, then they must be cleaned and dried immediately after washing. If you could not prepare leaves at the time of flowering, then you can make supplies during fruiting.
Fermentation steps
Withering currant leaves
The first stage of fermentation is the withering of the leaves, the whole process depends on the correctness of its implementation. At this stage, excess moisture is removed from the leaves, but at the same time, all essential oils and aromatic substances remain unchanged.The prepared leaves are laid out on a cotton canvas with a layer no more than 5 cm wide. Keep in mind that synthetics are not suitable as a substrate, since the raw material will absorb all toxic substances from the canvas.
Harvested raw materials should be stirred from time to time so that drying occurs evenly. Please note that the leaves should never dry out, so they should not be dried in a sunny window or in a windy place. As a rule, the process lasts about 12 hours. On a warm dry day, it happens a little faster, on a rainy day, on the contrary, a little longer.
Properly dried leaves, as a rule, are easily twisted and give a rather tasty and fragrant drink. After all procedures, the remaining water should remain at the level of 60-65%. It is very simple to make sure that it is ready: if, with a slight pressure on the leaf plate, its main vein does not crunch, therefore, the drying went well, but if you notice a crunch, then you should continue withering for another 2-3 hours. There is another way to check: the leaves should be tightly compressed into a tight lump, if it does not fall apart, therefore, the material is ready for further fermentation.
Getting juice
At the next stage, it is necessary to achieve the extraction of juice, since it contains the tannin responsible for fermentation. If there is too little juice, then the taste properties of tea will be significantly reduced.
There are three main methods to destroy the integrity of the leaves.
- Twisting by hand. To do this, take about a dozen dried leaves and roll them between the palms with effort, while the leaf plates should darken and moisten. The output is the so-called rolls, which should then be cut into small pieces to obtain tea.
- Kneading in a container.Such manipulations can be compared with kneading dough. The raw materials are laid out in a bowl and squeezed vigorously for half an hour, while the resulting lumps should be loosened from time to time, and the crumpled leaves should be straightened.
- Processing in a meat grinder. This is the easiest way, since the declared raw materials are simply scrolled through a meat grinder. The result is concentrated currant tea in granules. For work, you can use both manual and electric meat grinder.
fermentation
At the final stage, fermentation of raw materials is carried out - it is this that determines the taste, color and smell of the drink. To do this, the leaves processed by one of the above methods are placed in a plastic or enameled container 10-15 cm thick, and then placed under oppression. The bowl is wrapped with a canvas damp cloth, which must be moistened as it dries.
It is noticed that the more raw materials are prepared, the faster the fermentation process takes place. As a rule, at 22-25 degrees, fermentation takes 5 hours, but in some cases more time is required. A signal of readiness is considered a pungent smell of the plant - when it appears, fermentation should be stopped.
Drying and storage
Prepared currant leaves should be dried, and this should be done so that they do not lose their nutritional properties. Most often, the workpiece is laid out in an even thin layer on a baking sheet and placed in an oven preheated to 100 degrees for an hour. The oven door should be kept open, and after the specified time, the heating temperature is reduced by half and, with occasional stirring, dried for about 40 minutes. If the leaves begin to break when pressed, then the oven can be turned off.The leaves are transferred to a fabric bag and sent to dry in natural conditions (on the street).
Tips
Currant leaves, in comparison with others, used for fermentation, have a number of features:
- they are quite dry, even in rainy weather;
- the leaves are difficult to ferment and secrete little juice, and if you scroll them in a meat grinder, then after drying, sometimes not granules are obtained, but dust.
Experienced gardeners advise freezing such raw materials before fermentation. To do this, shoots and leaves should be washed, put in a plastic bag and placed in the freezer for several hours. After defrosting, such blanks curl very quickly and do not emit moisture, while the smell increases several times. Freezing in this case is used instead of withering, and not after it.
Tea from fermented currant leaves at home is best brewed with pear, as well as strawberry or apple. At the same time, the drink has a dark tea color, and the taste and aroma are currant. Such a composition contains a greater amount of vitamins and the most useful substances, therefore it can be used not only to quench thirst, but also for treatment.
This video clearly shows the process of fermenting currant leaves.