How to tie up grapes?

How to tie up grapes?

Grapes are a rather whimsical plant, but with timely and proper care, they can grow and bear good fruit almost anywhere in Russia. An integral part of the growing procedure is precisely the garter, the main stages and nuances of which should be studied by every novice gardener who plans to start breeding the fruit-bearing crop in question.

Why is it necessary?

Grapes are a fast-growing liana, which does not have a definite shape in natural habitats and braids everything in its path due to the antennae. That is why the garter procedure is extremely important when growing this plant. In addition to the fact that properly fixed shoots will decorate the garden or cottage of a novice gardener, there are reasons for using a garter, such as:

  • providing the bush with good ventilation and, as a result, reducing the risk of fungal pathologies or decay;
  • open access to sunlight, the action of which has a positive effect on sugar content, richness of taste, ripening speed and fruit size;
  • uniform distribution of nutrients to avoid loss of part of the crop;
  • facilitating the process of caring for the cultivated crop;
  • creation of optimal conditions for full pollination and subsequent ripening of berries.

All of the above factors will help the grape stems to form correctly and in a timely manner, set the desired growth vector and significantly increase the yield and taste of the product. From which it follows that in no case should the growth and development of a fruit-bearing vine be left to chance.

Timing

Initially, tying the vine occurs in early spring. At the preparation stage, it is required to remove the winter shelter, cut off all frozen and injured processes. Further, it is very important to catch the moment when the plant has not yet fully woken up after the winter, and the sap flow in it is just brewing. If you do not take this fact into account, you can cause significant damage to the kidneys, which are already very fragile.

Spring garter also has a second name - dry. There is also another type of tying (called green), which is carried out already in the summer, when the shoots of the cultivated crop reach a certain size. It must be carried out several times a season as it grows.

Kinds

Dry garter is carried out by carefully fixing the grapes in a horizontal way or at a slight angle to a special structure, which is required for a uniform supply of nutrients and the consumption of sunlight. Otherwise, the kidneys will open only in the upper zones to the detriment of the rest.

The name is due to the fact that the gardener has to deal with still dry, frozen last year's shoots.This type implies alternate and uniform tying of branches to the lowest part of the trellis - a kind of structure or support, consisting of vertically mounted metal, reinforced concrete or wooden poles, and a wire horizontally stretched between them in several rows. It is very important to first fully place the vine on the mount, and then carefully fix it in several places. The stems, on which young shoots will subsequently form, must also be tied to the trellis lattice in a timely manner. As a result, large clusters of the correct form are formed with beautiful, tasty and juicy berries.

The second method is applied at the moment when the grape sprouts reach 30 centimeters or more. This usually happens at the very beginning of the summer period. At this point, you should be especially careful and try not to harm the already formed kidneys. The grapes are fixed by the grower already at a right angle to avoid adverse weather conditions such as strong winds or heavy rains. When the branch of the vine grows, it is re-tied to a wire stretched nearby above.

But you should not continue the process after the appearance of the first clusters, so as not to damage them either.

Choosing a material

In the first, and sometimes in the second year of planting, it is enough to tie the seedlings to a peg. In the third year, the shoots begin to grow much more intensively, so you can no longer do without a universal device, denoted by the term trellis. You can build it yourself at home, even a novice gardener can easily handle it.The basis of this design is most often taken wooden, metal or reinforced concrete pillars with a height not exceeding 3 m and a diameter of at least 30 mm. The columns are fixed in the ground at a distance of 3 m from each other so that the support on the surface has a height of about 2 m.

Then a galvanized metal wire with a diameter of 1.8 to 2.4 mm is pulled between them. If the poles are made of wood, then the wire at the ends is fixed with special iron staples, and small holes are drilled in metal and reinforced concrete poles. The lowest row of wire is stretched and fixed at a distance equal to 40 cm from ground level. With an indent from 30 to 40 cm, the next level is pulled. Do the same with the higher rows. Usually their number reaches 4-5 pieces.

The described option is applicable to the installation of a single-plane structure. But you can also use a two-plane support, which is two ordinary single-plane tapestries installed on both sides of the row at a distance of 60 or more centimeters or connected to each other at an angle at the base.

The features of a two-plane structure include the fact that when constructing it, it is necessary to use pillars whose height corresponds to the distance between the rows. It was then that the trellis can be considered the most stable. It is used to increase the number of fruits as a result of cultivation.

When choosing wooden poles, it is recommended to use the following types of trees:

  • poplar;
  • acacia;
  • oak;
  • alder;
  • mulberry.

The above groups are practically not subject to decay.To protect the selected wood from the action of harmful insects, you first need to soak it in a five percent solution of copper sulphate. The lower part of the support is additionally coated with hot resin before burying it in the ground. Of course, the service life of metal poles is much longer, and the preparation procedure is not too complicated. In this case, it is also necessary to take into account the weather conditions and the weight of the fruit, the fragility of the wooden posts. Accordingly, it is more profitable to use in practice the basis of metal or concrete.

As materials for the plant garter itself, the best option would be a bast, thoroughly soaked in water. There are other options, among which the most preferred and common are the following:

  • soft tissue scraps and flaps;
  • polyethylene strips;
  • voluminous threads;
  • young, elastic shoots from willow;
  • thin twine;
  • old nylon stockings or tights;
  • fibrous materials such as sida and kenaf;
  • corn wraps;
  • special plastic clips.

In addition to these materials, you will also need special garden shears and a regular, but powerful or specialized stapler for the final fixation of the ends of the material.

How to tie?

In order to properly tie the grapes, you need to adhere to the following algorithm:

  • it is worth starting the process itself before the opening of young buds and the appearance of clusters, having previously cut off the damaged and frozen parts;
  • bring the branches of the grapes in one direction, but the shoots themselves must be divided for good ventilation;
  • place the plant on the trellis and fix it, after checking that the wire does not squeeze the branches and shoots anywhere;
  • check that the vine does not slip on the grate;
  • fix the vine with soft materials (tie with nylon stockings, fabric patches, polyethylene ribbons) or use a taper.

It should be noted that tying can be done with a figure-eight or a loop, when the tying material is additionally placed between the wire and the stem in order to avoid injury to the plant. It should be tied with an interval of 50 cm. Tapener is used when working with a large number of bushes to facilitate and speed up the whole process. This is a special tool, the functional set of which resembles the principle of operation of a conventional stapler. The device fixes the shoots with a soft film.

The garter is recommended to be done at each stage very carefully, while you should not rush. Each shoot taken is fastened in turn. Only a careful approach to this procedure will succeed and meet all the gardener's expectations.

If you want to save time, you can use the services of specialized stores to purchase ready-made support structures, fasteners, tools and garter materials.

Helpful Hints

In order for the whole cultivation procedure to succeed and give the desired results, A novice grower should consider the following important points:

  • it is strongly not recommended to use fishing line or coarse rope when tying, as these materials will inevitably cause damage to the plant, which will lead to partial or complete loss of the crop;
  • when implementing the process under consideration, it is not necessary to twist the shoots and the vine itself too much, so as not to block and limit the channels for the uniform distribution of nutrients;
  • you should try to smooth out strong bends, make the lines smooth;
  • young shoots should not be fixed using the uppermost internode; the best option for fixing would be fastening for their middle part or approximately at a distance of 2/3 of the length from the base;
  • in no case should the vine be tied up in a vertical position, since the buds will form only in its upper part; this method will inevitably lead to damage to the plant and significantly reduce the level of yield;
  • it is better to fix horizontally or at a slight angle;
  • old shoots at the lower level should be placed in a fan or half-fan, which optimizes the ventilation process and normalizes pollination of the plant;
  • in the zone of central Russia, cultivated crops need to be covered for the winter, so the fan shape will be the most rational option.

A bush formed in this way looks like a group of sleeves originating from the base of the plant. When located at different angles, but in the same plane, the sprouts are very simply removed from the supporting structure, and then covered during the winter cold. In the first year of planting after the initial stage of development, 2–4 vines remain on a young grape seedling.

In the second year, when the first pruning is done, the 2 strongest sleeves should be left, which are shortened to 2–4 buds. In the third year, 2 buds are again left on the vines remaining after the winter. The branches are tied horizontally to the trellis, and the shoots emerging from the buds are attached vertically. Tied up in this way, a grape bush schematically resembles a fan, which is why the name of the method is fan.

Fixation on the trellis should be done in such a way that there is no excessive squeezing or sliding of the branches, which will help to avoid uneven supply and distribution of nutrients and damage to the grapes. It is recommended to carefully separate the shoots and stems of the same vine to prevent the formation of a dense crown and provide the right space for their growth, maximum ventilation and normal pollination.

Fastening to the supporting structure must be carried out quite firmly in order to avoid its breakage under the weight of the fruit or during adverse weather conditions, such as severe hurricanes and heavy rains. In order to avoid severe injury to the stems in direct contact with the support, it is necessary to tie up the shoots with a figure-of-eight or a loop, that is, additionally place garter materials between the wire and the vine.

To simplify and speed up the process of growing a crop, you can contact specialized stores and purchase ready-made fixtures and support structures.

        There is also another, but less productive way of growing grapes, when you can do without installing a trellis. But even in this case, one cannot do without a certain structure in the form of a strong metal support, on which the branches of the plant will subsequently be thrown. This approach has several significant drawbacks.

        • Before the start of the winter period, it will be necessary to remove the branches of the vine from the support so that their partial or complete freezing does not occur. In the spring, the gardener will have to re-install all the elements of the supporting structure. Much more effort is put in, while the vine is very easy to damage with constant mechanical stress.
        • The stems must initially be formed correctly, they must be trimmed regularly. Without the use of a trellis, the process of caring for a plant is very complicated, there is a high risk of fungal pathologies and decay due to insufficient ventilation.

        Thus, the garter of grapes is an integral and most important part of the process of growing it. With a detailed study of all stages, any novice grower can handle it. But it is extremely important to observe all the nuances when implementing the tying procedure, only in this case you can achieve the best result with minimal effort and significantly increase the level of productivity.

        For information on how and how to tie grapes, see the next video.

        no comments
        The information is provided for reference purposes. Do not self-medicate. For health issues, always consult a specialist.

        Fruit

        Berries

        nuts