How to graft grapes?
There are few people who do not like grapes. He has a lot of varieties, and for each there is a connoisseur. Unfortunately, varieties with the most delicious and juicy fruits are not winter-hardy and unstable to pests, so they die rapidly. But this can be prevented by grafting a whimsical variety onto another, less picky one. So you can save and increase the harvest.
Why is it necessary?
There are several answers to the question why grapes need to be grafted, and each one is quite exhaustive:
- To replace varieties by propagating more valuable ones, and get a crop faster than uprooting a bush and waiting for it to bear fruit.
- To restore the growth of a bush with a damaged aerial part.
- To grow grapes on different types of rootstock. Then it successfully resists phylloxera, is winter-hardy, and also reacts less to soil salinity and the proximity of groundwater.
- So that valuable and rare varieties of grapes grafted onto an adult bush multiply faster.
- To form family bushes, which is especially important for small vineyards.
- In addition, grafting makes it possible to grow not one, but two or three varieties of grapes on one bush. In addition to being delicious, it also looks very nice in the overall composition of the summer cottage, at the same time saving space. This is especially valuable for gardens with a small area.
- If for some reason you do not like the grafted variety, you can change it to another.There is no need to plant a new bush for this, it is enough to graft the “split” of the desired variety.
If you have previously grafted apple or pear trees, then everything will go smoothly with the grafting of grapes - there are some nuances in the procedure, but in general the technology is the same. For the grafting to be successful, it is necessary to prepare two things: a scion and a rootstock, and do it according to the rules.
Timing
The "green to black" method is very convenient in that it can be applied in each of the summer months. They make it with the help of a lignified cutting, in which a green shoot is placed. Cuttings are prepared in September, in the summer they update the cut, which should be located at a short distance from the growth point. The cut must be sharpened, giving it a wedge shape. Then the shoot is placed in a basin or bucket of clean water and should be there until the kidneys swell. If the buds are not swollen, then the stalk is unsuitable for grafting. To stimulate the growth of cuttings, they are placed in a special composition for a third of an hour.
After swelling of the kidneys, they go directly to the vaccination procedure. It is performed either early in the morning or after six o'clock in the evening if the day is sunny. If not, any time will do.
The stock (the so-called vine on which the cutting is grafted) should be properly prepared: you need to cut off part of the shoot from it and make an incision in the middle. Its depth should not exceed 3 cm.
June-July is the right time for grafting a green cutting on a similar shoot. This is the same technique as the “back to back”, with the difference that the cutting does not need to be revived with water or growth stimulants. The cuttings are cut from the cultivar they want to graft just before being placed in the cut.Next, the cut is sharpened into a wedge shape and, finally, placed in an incision on the rootstock.
Autumn vaccination is carried out in a split trunk of a middle-aged bush, which has become worse to bear fruit. In order for the splicing to go well, it is necessary to properly split the bole and prepare the cuttings. First, they are soaked in one of the compounds that stimulate growth, where they lie for a couple of days. After that, it should become obvious that the stalk is alive: swollen buds will become visible on it, leaves will hatch, antennae will appear.
In the first days of October (subject to the temperature regime of + 15 degrees), you need to carefully cut off the part of the bole that is above the ground, then the cut point is cleaned with a sharp knife, which was previously disinfected. After that, the cut is wiped with a damp cloth.
Next, take a screwdriver with a straight nozzle, insert it into the middle of the trunk and drive it in with a hammer 3 cm deep. The tip of the cutting, pointed into a conical shape with a cut of no more than 3 cm, is inserted into the incision. If a perfect fit did not work out and gaps remain, they are closed with wet napkins or pieces of vine. Then you need to tie the vaccination site tightly (but do not overtighten!) with a piece of cotton rag or twine and cover it with one of the means to protect it from drying out (it can be wet clay, garden pitch or otherwise).
If the trunk is much wider than the cutting, then two or three cuttings can be grafted onto one bole.
Winter vaccination is suitable for young bushes no older than two years. It is held from January to March inclusive, but you need to prepare for it in the fall. After the leaves are dropped from the bush, they dig it up, cut it to a height of ten centimeters and disinfect the entire aerial part with a saturated solution of potassium permanganate.Then the bush in this form is placed in a container with a mixture of sawdust and sand and stored in a cool, dry place with an air temperature of about 0. 24 hours before grafting, the stock is taken out, thoroughly cleaned, all rotten roots are cut off, and healthy ones are shortened up to a length of 15 cm.
Then for several hours it must be stored in a warm room with a temperature of 18-20 degrees. After that, the stock is placed in a basin with water, its temperature should be about 15-16 degrees. In this form, the rootstock is stored for 24 hours. After a day, it is taken out, blotted with a dry, clean rag, and a cutting of the desired variety is grafted onto it in any desired way from those described above.
The grafted stock and scion should be placed in a container of a suitable size, covered with cellophane and left in a warm place with a temperature of about +25, a central heating battery is well suited - conditions are optimal next to it or on it. In this form, the structure should stand for two to three weeks, after which it is again rearranged in sand and sawdust and placed in a dark and cool place.
In the spring, as soon as the temperature is established and does not fall below 15 degrees, you need to pull out the grafted bushes from the sand and sawdust, carefully cut off everything that has died, let the bush “settle down” on the street for two to three days, and then finally plant in open ground. Such a winter vaccination is otherwise called desktop.
Care
After any vaccination, regardless of whether it is summer, spring or autumn, the stock needs watering and hilling. The soil near the trunk circle needs to be properly loosened. This will help the soil get enough oxygen.
When grafting a cutting into a split in a trunk, you do not need to pour earth where the scion and stock are connected.
Two weeks after vaccination, young shoots should appear on it. If this does not happen, you need to cut off the graft and part of the rootstock and graft the same cutting again.
Once every ten days, you should check how the scion and rootstock grow together. If the stalk does not take root in the rootstock, they must be carefully cut off, otherwise they will become stronger in the ground. Then you can’t talk about vaccination, it’s just planting a cutting.
In addition to the above, all the usual plant care activities should be performed: loosening the soil, getting rid of weeds, watering.
Ways
A sure sign that it's time to get vaccinated is when you see swollen buds. Most often it is April. The temperature should be established, sudden changes are unacceptable, cold nights - too. Must be stable heat.
What are the methods of vaccination?
Budding. When grafting in this way, the shield is cut from the shoot with indents of 2 cm up and down. After that, the shield is applied to the rootstock with exactly the same pre-made cut. The joint must be wrapped with adhesive tape or a piece of twine.
Underground back to back
The seedling that will be used as a stock is grown independently. In the spring, it is cut about 4-5 cm deeper than the ground level. On the remaining wood chips, a transverse incision is made, into which a wedge-shaped wooden pin is placed. Its length is about 3 cm, in diameter - 5 mm. A stalk is planted on this rod, used as a scion. Wet cotton rags are tightly wrapped around the junction of the pin and scion, tightly tied cellophane crowns the structure on top.
The fabric should not be allowed to dry, it must be constantly moistened without violating the tightness of the bag. When the buds bloom on the grafted cutting, the package is cut, and after the appearance of the shoots, it is completely removed.
Cuttings are best grafted when the eyes on it have just begun to sprout. If they outgrow, then the stalk is unlikely to take root.
"Oblique copulation"
It can be grafted using the “oblique copulation” method, it can be “splitted”. In the first case, you need to leave a small "tongue" on the trunk or rootstock. Whichever method of the two you choose, you need to remember that the junction of the scion and stock must be treated with a special compound that will speed up their splicing. In addition, it is necessary to fill this joint with paraffin in order to prevent diseases of a fragile seedling. Or, if for some reason you do not want or cannot paraffin the junction of the cutting and the bush, it is wrapped with a clean rag soaked both in water and in a composition that accelerates growth, and on top also with a layer of cellophane.
Thus, the grafted shoots must be stored in boxes, on each of the layers put a material that retains moisture, and on top of it - a film. The temperature should not fluctuate by more than 2 degrees and should always be near the mark showing +20 degrees. If there is no moisture-retaining material at hand, it's okay. Wet sawdust can easily replace it.
"In the split"
Grafting by the “split” method can occur both “black to black” and “green to green”. Both of these options are popular with gardeners. For the first method, shoots of the past or the year before are chosen, which are specially left for this purpose. They are grafted into a well-formed, perennial vineyard.And for the second method, both the scion and the stock must be fresh, the same in age. Accordingly, for a "green" vaccination, the shoot is cut off immediately in front of it, immediately after the cut, placed in water, and then in a chubuk.
If the vaccination is successful, then extra roots, eyes and shoots will grow on the stock. They need to be disposed of in order for the bush to form strong. Otherwise, top dressing will not go where it is needed (at the junction). Winding with rags should be kept at the junction until the end of August.
It is convenient to graft with a Korean grafting pruner - it comes with three sharp knives, which makes it easier to cut the cuttings.
The method of grafting on a trunk differs from others in the number of rootstocks: there must be at least two of them, and on each - at least three eyes. Vaccination is done until the end of spring.
Also, grapes can be grafted onto mulberries (by drilling), however, experienced gardeners note that this is a laborious method, and not always effective. The technology for this vaccine is as follows:
- drill a hole in the mulberry;
- peel the lower part of the stock from the bark and insert it into the drilled hole;
- if the fusion is successful, then the shoot must be disconnected from the common bush and planted in a separate hole in the open field.
Harvesting and preparation
In order for the scion and stock to grow together, an apiary is needed - in other words, the movement of juices.
The preparation of cuttings for the future grafting procedure takes place in the fall. At the same time, each grape bush is pruned for the cold season. The cut stalk must have a certain number of buds - at least four. They should be stored in a rag moistened with water, wrapped in cellophane on top.
The bush itself, into which it is planned to plant the cuttings, is carefully cut, leaving one vine, and covered for the winter.Before grafting, the bush must be opened.
If the vaccination is carried out using the “green” method, then the shoot does not need to be prepared, it is cut off right before being grafted.
How to graft?
In order for all your rootstocks to take root, you need to follow these recommendations.
- Everything has its time. If you decide to do a spring vaccination, its "season" is the beginning of the movement of juice, summer - from early June to mid-July, autumn - until the first days of August before the vine matures.
- The winding of the junction must be done in such a way that not a drop leaks out from under it. It should be as tight as possible.
- The temperature regime should be the one recommended at all stages of the vaccination procedure.
- The cambial layers should be completely displaced, otherwise there is a high probability of burns on the cuttings.
- When planting a grafted cutting, do not forget to add soil.
- If additional growth points appear on the seedling, in addition to the grafted one, they should be disposed of. If you are growing grapes in the southern region, this rule can be ignored, because the soil there is so fertile, and the sun is generous that everything will grow.
Mistakes
If you are grafting grapes for the first time, then in no case do not engage in amateur activities. Experienced winegrowers have already thought of everything before you, so the most important thing is to choose a grafting method and follow all the recommendations with 100% accuracy.
It is best to talk with people for whom this process is not new, and see firsthand how and in what sequence you need to act.
For your vaccination procedure to be successful:
- choose varieties that are optimal for your climate zone - the sun-loving "southern" variety will be difficult to grow in Siberia;
- if your area has severe winters, stop at winter-hardy varieties;
- try to ensure that both the scion and the stock match in growth strength;
- the scion should be prepared in the fall, stored in the underground or in the refrigerator;
- when grafting, it is necessary to use a special, very sharp knife;
- carefully sharpen the handle, it must have a strictly wedge-shaped shape;
- the stalk is cut in the direction “away from you”, otherwise the cut will have a concave shape;
- even if the scion and stock have successfully grown together, you need to control the junction and protect it;
- the length of the cut on the handle should be exactly the same in size as the depth of the scion cut.
For information on how to make a "green graft" of grapes, see the following video.