What is barley malt and how to prepare it?
Beer is the favorite drink of millions of people. Many cook it with their own hands, so as not to encounter low-quality store products. But this work is impossible without good malt. You can also make it yourself at home.
What it is?
It is appropriate to start talking about barley malt by describing its role in home brewing. Alcohol, which is part of any alcoholic beverage, is produced by yeast. But just adding them to cereal grains is not enough. So you can only make a paste. By splitting starch into substances that are simpler in molecular structure, it is possible to force the yeast to produce alcohol. And the simplest way of such splitting, available in every home, is just getting malt.
It can be prepared by sprouting barley grains. This process in the brewing industry can also be called "saccharification" or "malting". The essence of the name change does not change: there are special enzymes that convert starch into simpler components.
Malt concentrate can be used for more than just beer. It is used to prepare whiskey, kvass and a number of other drinks. And also it can be used as a natural sweetener, adding to tea, desserts and pastries. The benefit of such a product in private brewing is associated with a reduction in time and financial costs.Malt extract is obtained in a rather complicated way: the malt itself has to be mashed. However, no primary product and no processing will give a positive result if the raw materials are not properly selected.
How to choose grain for sprouting?
Fresh barley is definitely not useful: it sprouts very poorly. The ideal raw material is that harvested at least 2 months and no more than 12 months ago. A good barley grain should ripen, become heavier, acquire a light yellow color. The inside of quality barley is always white, friable, the grain quickly sinks when immersed in water. Another requirement is a thorough screening.
There should be no signs of weeds in the grain mass.
Another important point is a thorough check of the germination of grains. One hundred large grains are laid out in a glass and poured with water. Those grains that float up are removed, replacing them with full-weight specimens. When only dense barley is selected, it is removed, laid out on a saucer, covered with a damp cloth. The grain is transferred to a dark place. If the fabric dries out over the next 2 or 3 days, it is additionally moistened. At the end of the test period, the % of seeds that did not germinate are counted.
The malt should be 90-92% or more viable. If this condition is not met, fermentation will be extremely difficult.
Cleaning and soaking
A simple assessment of germination cannot be limited. After sifting the grain, pour it into any suitable container. Water is poured in there, again removing everything that comes up, as well as foreign inclusions and debris. Next, the grains are washed twice, and if necessary, more, until the drained water becomes clear. Now you need to soak the barley for 6 or 8 hours so that the water covers the grains by 3–4 cm.Important: it is unacceptable to exceed the processing time. This technique allows you to reduce the time spent.
If, however, instead of the "drip method" you choose the traditional approach, you will have to soak the grain longer, since it is necessary to increase the moisture content of barley to 40%. Soaking allows you to easily separate the shell from the main part of the grains and eliminates the destruction of the seeds when bent. In summer, the water is changed every 6 hours. In winter, this is done twice as often. The total soaking time exceeds 24 hours. After washing, the barley must be disinfected. Work as follows:
- additionally washed barley:
- fill it with weak solutions of iodine or potassium permanganate;
- after 15 minutes pour the solution;
- the grains are washed again;
- start growing.
If disinfection is ignored, the likelihood of contamination of malt with putrefactive microorganisms increases significantly. The fact is that conditions favorable for fermentation also contribute to the development of dangerous microbes. The water that was used for disinfection and washing is poured out completely. The slightest moisture on the surface of the grains is not allowed. If, after breaking the barley seed, you can see a white liquid, it means that the soaking was too long, you can no longer get a quality product.
How to germinate malt?
Growing malt at home can be done in two very different ways. Beginners need to germinate barley without watering - this technique is easier. In this case, the grain will have to be soaked for a long time, at least 1 day. When the raw material is washed and disinfected, it must be allowed to “breathe”. Wet barley is laid out in boxes in such a way that there is a layer of 5 cm everywhere.
There he should lie for 6 or 8 hours.During this time, you will have to mix the grains 2 or 3 times. They are raised above the surface of the box, providing purging and cleaning from carbon dioxide. When the "ventilation" is over, the grains are poured into boxes or basins, making the layer already 10 cm thick. It is important to make the layer even. Capacities should be covered with a damp cloth.
When germinating malt with your own hands, the temperature in the room should be strictly 17 or 18 degrees. If the air is colder, the development of grains will be inhibited. With stronger heating, one must be wary of rotting and mold infection. The next stage is continuous ventilation and active wetting of the grains. Barley should have a moisture content of 40%.
Visually dry grain is sprayed with water, using 50-70 g of water for every 5 kg at a time. Tedding and spraying is carried out every 6-8 hours.
It is recommended to use perforated boxes. If there is no perforation, water may collect at the bottom. In this case, you will have to remove it from there, and dry the grains additionally.
For the first 5 days of germination, barley should be aired regularly. But the further flow of air must be limited. This reduces the loss of starch. It is sometimes written that homebrewers may not follow this rule. However, it would be more correct to carefully reproduce the practice developed in industrial brewing.
When the grain is ted, you can not be afraid of the destruction of the roots or sprouts. Biochemical transformations in grains will invariably continue, and the production of enzymes will continue. When 2-3 days have passed, the barley will begin to increase in size, and the temperature inside the seeds will rise. At this point, everything possible must be done so that the grain is not moistened excessively.
The barley mass is ted as actively as possible, it is even desirable to reduce the layer to 5 cm.
Ready malt is recognized, the sprouts of which are equal in length to the grains themselves or exceed it. Important: do not confuse sprouts and roots. Such an error can lead to irreparable consequences. The processes are shorter than the roots, but thicker than them. There are several other eligibility criteria:
- the sweetness of the grains and the absence of a floury aftertaste;
- crunch when biting;
- smell like a cucumber;
- plexus of roots, which almost does not allow taking the grains separately from each other.
The “flowing” method is somewhat more complicated. It necessarily requires perforated containers, while the holes should be as small as possible. Watering is carried out at least 1 time in 12 hours (ideally - 1 time in 6 hours). It is not recommended to save liquid: using an impromptu shower, pour water for about a minute. The exact time each time is determined individually, gaining experience.
By varying the temperature of the water, the rate of germination can be influenced. Increase it using a warm liquid, and a cold shower, on the contrary, inhibits development. It is recommended to turn the boxes twice a day. To simplify the work, they are pre-equipped with sieves on both sides. To assess whether the malt is finally ready, follows the same rules as with the classical technology.
Drying
When the malt is germinated, it is certainly disinfected. This is necessary even if the initial disinfection was carried out in accordance with all the rules. The grains are again treated with weak solutions of iodine or potassium permanganate. Soak the malt for 30 to 60 minutes. Important: by increasing the concentration of potassium permanganate, you can reduce the processing to 20 and even up to 15 minutes.
Some wash the green malt with sulfuric acid diluted to 1%. But it needs to be used carefully.Important: barley malt must be used as soon as possible. All kinds of microbes and fungi grow very easily in it. Even if these organisms are not dangerous in themselves, they will absorb useful substances and suppress the normal development of yeast.
If you can not immediately apply the malt, it would be best to dry it. At the same time, the product becomes light, and it will be possible to store it in dry glass jars for more than a year. During drying, it is unacceptable to heat the grain to more than 40 degrees. Beyond this mark, valuable enzymes, for which malt is produced, are quickly destroyed.
At home, barley is dried on warm floors in well-ventilated areas. and you can also use a special drying cabinet. Sometimes the malt is placed in unoccupied rooms, where it is dried with wind heaters. The moisture content of the grains after drying is from 3 to 3.5%.
Storage
Preparing to package the dried malt, carefully clean it from all the remaining roots and sprouts. If there is no desire to grind the grains by hand, they are poured into a bag that is rolled so that the sprouts fall off on their own. Then the malt is sieved. They do it outside on windy days. Indoors, it is necessary to sift the grains in front of the fan. Store the sifted product in a closed container in dry places. You can leave it for a long time. Barley malt can be used to make beer from any raw material containing starch.
See below for how to prepare barley malt.